Aflatoxin B1 Test (Edible Oil)

Quicking Aflatoxin B1 Test has lower price but nearly the same quality compared to that made by Europea or USA.

1.        INTENDED USE

Quicking Afaltoxin B1 Test is a competitive immunoassay for the semi-quantitative detection of the presence of Aflatoxin B1 in edible oil sample.

Cut-off:   5 ppb base

Assay Time:  5 - 10 min

Sample: Edible oil

2.        PRINCIPLE OF THE ASSAY

Quicking Aflatoxin B1 Rapid Test is based on competitive lateral flow immunochromatographic assay. The Aflatoxin B1 conjugate in the test zone will capture the immuno-gold (colloid gold-AFB1 antibody conjugate), when there is very little dissociative AFB1 in the extraction. A visible red test band indicates a negative result when the control band (C zone) shows that the card is valid. The test band (T zone) will be not visible if AFB1 is present in concentration of the cut-off value and above which explains a positive result.

3.        KIT COMPONENT

-           10×foil pouches, each containing one AFB1 cassette with a pipette and a desiccant

-           1×assay diluent (50 mL) 

-           2×centrifugal tubes (15 mL)

-           Products Manual

4.        TEST PROCEDURE

-           Weigh out 2.0 g of the edible oil sample in a beaker. Add 8 mL of hexane into the beaker and transfer the mixture into a centrifugal tube (15 mL).

-           Add 4 mL of distilled water into the tube and shake for 3 min. Get rid of the supernatant hexane layer.

-           Add 4 mL of ethyl acetate into the tube and cover the lid. Shake for 5 min. (If emulsification appears, do a centrifugation at 4000rpm for 1 min.)

-           Collect accurately 2 mL of supernatant (ethyl acetate layer) into a small container (beaker or tube). Dry the liquid by blowing wind.  

-           Redissolve the residues in the small beaker with an amount of the provided assay diluent. (REF: Table )

Cut-off (ppb)	4	5	10	20	50	100
Assay Diluents (mL)	0.48	0.6	1.2	2.4	6.0	12.0

-           Take out the cassette from the foil pouch and place it horizontally.

-           Suck the liquid and drop 4-5 drops into the assay sample hole “S”

-           Interpret the result in 5-10 minutes. Result after 10 minutes is considered as invalid.

5.        INTERPRETATION OF RESULTS

Positive: Only one clear band in C zone indicates a positive result. The concentration of Aflatoxin B1 will be determined by the amount of assay diluent added as per table. 

Negative: The presence of both bands in C zone and T zone.

Invalid: No band appears in C zone.

6.        STORAGE

The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the foil pouch. DO NOT FREEZE. Do not store the test kit in direct sunlight.

7.        PRECAUTIONS

-           For best results, please strictly adhere to these instructions.

-           All reagents must be at room temperature before running the assay.

-           Do not remove test cassette from its pouch until immediately before use.

-           Do not reuse the test kit.

-           Do not use the test beyond its expiration date marked on the foil pouch.

-           The components in this kit have been quality control tested as standard batch unit. Do not mix components from different lot numbers.

8.        LIMITATION

Quicking Aflatoxin B1 Rapid Test is an useful tool offering a rapid and accurate testing in field screening, exceeding with its convenience. It provides a semi-quantitative method to detect the Aflatoxin B1 above 5 ppb in edible oil samples. If you want a quantitative result, please adopt other method such as ELISA/ HPLC in practice.

Aflatoxin B1 Test (Edible Oil)